Single Layer Graphene Ink-Jet Printable Conductive Ink
Catalog Number
ACMA00064383
Product Name
Single Layer Graphene Ink-Jet Printable Conductive Ink
Description
Our graphene ink is designed for either inkjet printing or spray application. The ink is designed to be cured at 300-350 ˚C. The ink is based on single layer graphene (< 1 nm thick) of lateral diameter ≤0.5 µm.
Density
0.934 g/mL
Application
Sensors Barrier layers Heaters General printed electronics
Drying Temperature
300-350 ˚C
Drying Time
30 mins
Features And Benefits
No requirement for reducing atmosphere High graphene content after cure Single layer graphene Increased transparency compared to few layer graphene inks Compatible with inkjet, spin-coat and spray deposition
Sheet Resistance
4-13 kΩ/ (45 to 70%T at 660 nm)
Solid Content
1 mg/mL
Substrate
Glass, high temperature substrates
Surface Tension
32.4 mN/m
Viscosity
10-12 cps at 25 ˚C
Our products are for research use only and cannot be used for any clinical purposes.
